Preventive Analysis of Maintenance On Centrifugal Pumps Using The Mean Method Time Between Failure (MTBF) and Mean Time To Repair (MTTR)
Downloads
Abstract
Centrifugal pumps are essential equipment in fluid distribution systems that operate continuously, so they have the potential to suffer damage that can reduce the reliability of the system. This study aims to analyze the damage and effectiveness of centrifugal pump maintenance using the Preventive Maintenance Analysis method on centrifugal pumps using the Mean Time Betwwn Failure (MTBF) and Mean Time To Repair (MTTR) methods. The MTBF value is used to determine the reliability level of the pump, while the MTTR is used to evaluate the efficiency of the repair time. The results of the analysis show that a high MTBF value indicates good pump reliability, while a low MTTR value indicates an efficient repair process. Based on the results of the study, it can be concluded that the implementation of planned and reliability-based maintenance is able to reduce downtime and improve the performance and service life of centrifugal pumps. This research is expected to be a reference in the preparation of a more effective and optimal pump maintenance strategy.
Keywords:
Centrifugal pump, maintenance, breakdown and MTBF, MTTR..References
[1] Ali, A., & Abdelhadi, A. (2022). Applied sciences Condition-Based Monitoring and Maintenance : State of the Art Review.
[2] Barafi, K. A. (2024). Vibration Diagnostics for Predicting Pump Failures. 7, 637–643.
[3] Contrib., W. (2026). Vibration. In Wikipedia, The Free Encyclopedia. Wikimedia Foundation. https://en.wikipedia.org/wiki/Vibration
[4] Danung Yudistira, A., Al Alif, R., Syarief, S., Negeri Jakarta, P., & G. A. Siwabessy, J. D. (2023). The Centrifugal Pump Fault Test Model Uses An Accelerometer Sensor For Predictive Maintenance. Journal Informatics and Applied Electrical Engineering, 11(3), 2830–7062. https://doi.org/10.23960/jitet.v11i3%20s1.3560
[5] Feriadi, I., Riva'i, M., Aswin, F., Pramono, E., & Putra, N. I. (2025). Development of a multi-parameter condition-based monitoring model for early detection of potential damage to centrifugal pumps in clean water distribution systems. Journal of Multidisciplinary Research of the Nation, 1(9), 1785– 1793. https://doi.org/10.59837/jpnmb.v1i9.336
[6] Fitrian, A. B., & Kundori, K. (2025). Analysis of Centrifugal Pump Conditions Based on Vibration to Prevent Pump Failure at Cepu Oil and Gas Refinery. Maritime Journal of Polimarin, 11(1), 1–5.
[7] Mesin, T., State of Medan, P., & Alma Mater, J. (2023). Scientific Journal of Pump Vibration Performance in Steam Condensate Pump (G-2707) I N F O A R T I K E L. Journal of Maritime Horizons, 05(1), 62–895. http://ojs.polmed.ac.id/index.php/Sinergi/index
[8] Musad, B. N., Golwa, G. V, Azmi, M. R. H. A., Dwiyanto, R. F., Kuswantoro, H., & Nafi, I. M. (2024). Vibration Analysis as an Indicator of Optimal Performance.
License
Copyright (c) 2026 Ardian Saputra, Erwen Martianis
This work is licensed under a Creative Commons Attribution 4.0 International License.
Downloads
How to Cite
