Analysis And Control Of Genset Damage Risk In The Facility Department Using The Hazard And Operability Study (Hazop) And Fault Tree Analysis (FTA) Methods
DOI:
https://doi.org/10.51601/ijse.v6i3.778Abstract
A generator set (genset) is an essential supporting facility that ensures the continuity of electrical power supply in manufacturing companies during failures of the main power source. Generator failures may interrupt production activities, increase maintenance costs, and reduce overall operational effectiveness. This study aims to identify potential risks of generator set failures using the Hazard and Operability Study (HAZOP) method, analyze the root causes of failures using Fault Tree Analysis (FTA), and propose appropriate risk control recommendations. The research data were collected through observations, interviews, documentation, and historical maintenance records from the Facility Department. The HAZOP analysis revealed that radiator overheating had the highest Risk Score of 20, categorized as an extreme risk, while battery drop and fuel filter blockage each obtained a Risk Score of 16, categorized as high risk. Furthermore, the FTA results indicated that generator failure was caused by several basic events, including battery drop, fuel filter blockage, radiator overheating, alternator failure, starter motor failure, and oil leakage, with a calculated top event probability of 67.2%. The proposed recommendations include implementing preventive maintenance, conducting routine inspections, replacing components based on service life, and improving generator condition monitoring to enhance equipment reliability and minimize operational failure risks.
Downloads
References
[1] Basri, M. R., Budiharti, N., & Sari, S. A. (2022). Analisis Potensi Bahaya Dengan Menggunakan Metode Hazop (Hazard And Operability Study) Pada Bagian Pracetak: Studi Kasus PT. Gudang Garam Tbk. Direktorat Grafika-Waru.
[2] Bastuti, S. (2021). Identification Of Potential Hazards On Production Machines With Hazops And Fishbone Diagram In Pt. 17–25. https://doi.org/10.24853/sintek.15.1.17-25
[3] Burns, L., Le Roux, N., Kalesnik-Orszulak, R., Christian, J., Dudinak, J., Rockhold, F., Khozin, S., & O’Donnell, J. (2023). Real-world evidence for regulatory decision-making: Updated guidance from around the world. Frontiers in Medicine, 10, 1236462. https://doi.org/10.3389/fmed.2023.1236462
[4] Cantika, N. A., Fathimahhayati, L. D., & Pawitra, T. A. (2022). Penilaian Risiko K3 Pada Pengaliran BBM Ke Tangki. 8(1), 68–74.
[5] Daryanto, & Kunciwati. (2023). Mitigasi Potensi Sumber Bahaya Pada Engine Room Di Kapal Dalam Industri Pelayaran Menggunakan Metode Hazard and Operability Study (HAZOP) Dan Fault Tree Analysis (FTA). https://doi.org/10.30649/japk.v15i2.143
[6] Gaol, Y. L., & Irwan, H. (2026). Analisis risiko kegagalan hydrotest pada line pipe system menggunakan metode failure mode and effects analysis (FMEA).
[7] Jimenez-Roa, L. A., Heskes, T., Tinga, T., & Stoelinga, M. (2022). Automatic inference of fault tree models via multi-objective evolutionary algorithms. Reliability Engineering & System Safety, 223, 108515. https://doi.org/10.1016/j.ress.2022.108515
[8] Khilmy, A., Irawan, M. I., & Lidiawaty, B. R. (2021). The risk assessment of genset installation project using Fault Tree Analysis in Indonesia. IPTEK Journal of Proceedings Series, 7(1), 1–6. https://doi.org/10.12962/j23546026.y2021i1.11070
[9] Leonard, R. N., & Hauptfleisch, M. (2023). An artisanal mining environmental code of practice for Namibia.
[10] Mohammadhasani, F. M., & Pirouzmand, A. (2021). Multi-state risk-based maintenance analysis of redundant safety systems using the Markov model and Fault Tree method. Frontiers in Energy Research, 9, 685634. https://doi.org/10.3389/fenrg.2021.685634
[11] Mohammadi, S., Heidar, M., Fazli, Z., Kaleh, H., Azimi, H. R., Moradi Hanifi, S., & Shafiee, N. (2021). Risk analysis and reliability assessment of overhead cranes using Fault Tree Analysis integrated with Markov chain and fuzzy Bayesian networks. Mathematical Problems in Engineering, 2021, 6530541. https://doi.org/10.1155/2021/6530541
[12] Purnomo, D. W., & Hermansyah, M. (2024). Quality Control Analysis on 100ML Bottle Products with Fault Tree Analysis Method Approach and Failure Mode and Effect Analysis. 11(3), 153–161.
[13] Putra, A., & Irwan, H. (2026). Kualitas produk wellhead equipment menggunakan metode six sigma (DMAIC) pada perusahaan manufaktur.
[14] Putra, C., Ilmi, N., & Rahman, T. (2022). Evaluasi Pengendalian Risiko Pada Pengujian Remotely Operated Vehicle (ROV) Dengan Metode Hazard and Operability Study (HAZOP). 1(2), 81–93.
[15] Rahmadani, N., Anggoro, D. P., & Ahmad, E. F. (2026). Analisis Kecelakaan Menggunakan Metode Fault Tree Analysis (FTA), Simulasi Overpressure Aspen HYSYS, Dan Layers of Protection (LOP) Pada Kasus Kelley Manufacturing Company Operation (KMCO) Texas. 10(11), 1–8.
[16] Rezapahlefi, D., & Hermansyah, M. (2023). Process control of sack production using Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) methods. 10(2), 91–100.
[17] Robbi, B., Zainunnushhi, H., & Rizqi, A. W. (2025). Analisis Losses atau Penguapan Pada Pengisian Gas Argon Dengan Metode. 4(4), 1192–1200.
[18] Rohman, H., Jufriyanto, M., & Rizqi, A. (2024). Identifikasi potensi bahaya pada proses fabrikasi dengan pendekatan keselamatan dan kesehatan kerja. 7, 2309–2319.
[19] Safitri, D. A. (2025). Analisis risiko operasional produksi pada home industry konveksi dengan metode Failure Mode Effect Analysis (FMEA). 1–10.
[20] Santoso, I. G., & Trijeti. (2025). Analisa Penyebab Keterlambatan Proyek Bangunan Gedung Perkantoran 53 Lantai Menggunakan Metode Fault Tree Analysis (FTA).
[21] Sidiq, A., & Irwan, H. (2026). Analisis dan pengendalian risiko kerusakan insulasi kabel pada hazardous area oil and gas menggunakan metode HAZOP dan Fault Tree Analysis (FTA).
[22] Siswantoro, N., Priyanta, D., Risnavian, A. D. R., Zaman, M. B., & Pitana, T. (2022). HAZOP Study and SIL Verification of Fuel Gas System in ORF Using IEC 61511 Standard and FTA Method. 7(1), 8–17.
[23] Suroso, P., & Meiricho, J. (2023). Implementasi Metode Failure Mode and Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Menurunkan Tingkat Risiko Kecelakaan Kerja.
[24] Syifa, N., Rizqi, A., & Dhartikasari, E. (2026). Analisis risiko keselamatan dan kesehatan kerja pada workshop fabrikasi menggunakan metode Hazard and Operability Study (HAZOP). 5(1), 103–109.
[25] Zhang, S., Niu, Z., Ou, Y., Li, Y., & Hong, J. (2026). Risk identification and prevention in substation operation and maintenance using JHA-HAZOP methodology. Electric Power, 59(6), 192–201. https://doi.org/10.11930/j.issn.1004-9649.202510088.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Boas Ginting, Hery Irwan
This work is licensed under a Creative Commons Attribution 4.0 International License.
