Experimental Study of the Effect of Air Input on Temperature Distribution Inside a Tropical Greenhouse Using Natural Convection
DOI:
https://doi.org/10.51601/ijse.v6i2.728Abstract
This study employed an experimental research method with a quantitative approach to investigate the effect of air inlet position and opening area on temperature distribution inside a tropical greenhouse utilizing natural convection. Three ventilation configurations were tested: V1 with a bottom air inlet and an opening area of 0.02 m², V2 with a middle air inlet and an opening area of 0.04 m², and V3 with a top air inlet and an opening area of 0.06 m². The experiment was conducted in a naturally ventilated tropical greenhouse under controlled conditions while maintaining constant greenhouse dimensions, covering materials, measurement schedules, and weather conditions. Environmental parameters, including air temperature, relative humidity, and air velocity, were measured at twelve observation points distributed throughout the greenhouse using thermocouples, a hygrometer, and an anemometer. Data collection was carried out during the morning, midday, and afternoon to evaluate the daily variation of the greenhouse microclimate. The collected data were analyzed based on the principles of heat transfer, including conduction, natural convection, and thermal radiation, to determine the influence of different ventilation configurations on airflow circulation and thermal performance. The experimental method enabled direct observation of the relationship between air inlet configuration and the resulting environmental conditions, providing a reliable basis for evaluating the effectiveness of natural ventilation in improving temperature distribution and overall microclimate quality inside tropical greenhouses.
Downloads
References
[1]. ASHRAE. (2021). ASHRAE Handbook—Fundamentals. American Society of Heating, Refrigerating and Air-Conditioning Engineers.
[2]. Boulard, T., Kittas, C., Roy, J. C., & Wang, S. (2002). Convective and ventilation transfers in greenhouses, Part II: Determination of the distributed greenhouse climate. Biosystems Engineering, 83(2), 129–147.https://doi.org/10.1006/bioe.2002.0106
[3]. Boulard, T., & Wang, S. (2002). Experimental and numerical studies on the heterogeneity of crop transpiration in a plastic tunnel. Computers and Electronics in Agriculture, 34(1–3), 173–190.https://doi.org/10.1016/S0168-1699(01)00186-7
[4]. Campen, J.B., Bot, GPA, & de Zwart, H.F. (2009). Dehumidification of greenhouses at northern latitudes. Biosystems Engineering, 104(2), 133–144.
[5]. Fatnassi, H., Boulard, T., Poncet, C., & Chave, M. (2015). Optimization of greenhouse insect screening with computational fluid dynamics. Biosystems Engineering, 93(3), 301–312.
[6]. Gupta, A., Kumar, R., & Singh, P. (2023). Climate control strategies for sustainable tropical greenhouse production. Journal of Cleaner Production.
[7]. Incropera, F.P., DeWitt, D.P., Bergman, T.L., & Lavine, A.S. (2017). Fundamentals of Heat and Mass Transfer (8th ed.). John Wiley & Sons.
[8]. Kittas, C., Boulard, T., & Papadakis, G. (1997). Natural ventilation of a greenhouse with ridge and side openings: Sensitivity to temperature and wind effects. Transactions of the ASAE, 40(2), 415–425.
[9]. Li, X., Zhang, Y., Wang, H., & Chen, L. (2024). Natural ventilation performance and thermal environment evaluation in tropical greenhouses. Biosystems Engineering.
[10]. Piamat, S., et al. (2021). Performance evaluation of UV plastic drying house for moringa leaf drying under tropical climate conditions. IOP Conference Series: Earth and Environmental Science.
[11]. Prajnanta, F. (2011). Overcoming Chili Cultivation Problems. Self-Help Spreader.
[12]. Priono, A., Gafur, A., & Hajar, I. (2022). Design and construction of an Internet of Things (IoT)-based mini smart greenhouse using an evaporative cooling pad system. INOVTEK Machine Series.
[13]. Rahayuningtyas, A., & Kuala, SI (2016). The effect of temperature and air humidity on the cassava drying process. ETHOS: Journal of Research and Community Service, 4(1), 99–104.
[14]. Sethi, V.P., & Sharma, S.K. (2008). Survey of cooling technologies for worldwide agricultural greenhouse applications. Solar Energy, 81(12), 1447–1459.https://doi.org/10.1016/j.solener.2007.03.004
[15]. Singh, D., & Sharma, P. (2022). IoT-based environmental monitoring system for greenhouse agriculture: A review. Computers and Electronics in Agriculture.
[16]. Sukirno. (2015). Fluid Mechanics for Engineering. Graha Ilmu.
[17]. Taki, M., Rohani, A., & Rahmanian-Koushkaki, H. (2018). Assessment of energy consumption and greenhouse climate using intelligent control systems. Information Processing in Agriculture.
[18]. Teitel, M., Atias, M., & Barak, M. (2008). Airflow patterns through roof openings of naturally ventilated greenhouses. Biosystems Engineering, 101(1), 111–122.
[19]. Zhang, Y., Li, X., Chen, H., & Wang, J. (2023). Thermal performance analysis of naturally ventilated greenhouses under tropical climate conditions. Agricultural Engineering International: CIGR Journal.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Muhammad Razis, Abdul Gafur
This work is licensed under a Creative Commons Attribution 4.0 International License.
