Experimental Study of the Performance of the Calpeda B Cm 20e Type Centrifugal Pump as a Practical Tool
DOI:
https://doi.org/10.51601/ijse.v6i2.731Abstract
Centrifugal pumps are widely used in industrial applications and educational laboratories because of their simple construction, ease of operation, and ability to provide a stable flow rate. This study aims to analyze the performance of the CALPEDA BCM 20E centrifugal pump through experimental testing as a laboratory learning medium. In addition, the study develops a practical testing system by integrating transparent piping and a digital flow meter to improve the accuracy of flow rate measurements and enable direct observation of fluid flow. The research employs an experimental method by operating the pump under several operating conditions to obtain data on flow rate, total head, hydraulic power, shaft power, and pump efficiency. The collected data are analyzed using fundamental fluid mechanics equations and centrifugal pump performance characteristics and are presented in the form of tables, graphs, and performance curves. The developed laboratory equipment is expected to improve students' understanding of fluid flow phenomena and the relationship among flow rate, head, hydraulic power, and pump efficiency. The findings of this research are expected to provide useful information for evaluating centrifugal pump performance and support the development of more effective and interactive laboratory learning media.
Downloads
References
[1]. Ahadi, S. (2025). Maintenance and Repair of Centrifugal Pump Tag No. 900-01 P 1D at PT Kilang Pertamina International Refinery Unit II Sungai Pakning. Bengkalis State Polytechnic.
[2]. Akbar, K. (2025). No Title. Bengkalis State Polytechnic.
[3]. Alkindi, R.M. (2025). PT Wilmar Group Pelintung Dumai Unit Corrective Maintenance of Centrifugal Pumps RZ Pumpe Type R-NJA 50-200. Bengkalis State Polytechnic.
[4]. Ansori, SB (2025). Preventive Maintenance of Centrifugal Pump (Niagara Pump PU-625) at PT Pacific Indopalm Industries. Bengkalis State Polytechnic.
[5]. Aulia, NF (2021). Evaluation of Centrifugal Pump Performance in Thermal Oil Systems in the Food Processing Industry Using PSAT Software. Energy Engineering, 17(3), 239–251.
[6]. Chandramouli, K. D., Chaitanya, N. S. J., & Professor, Y. P. (2023). A Review on Centrifugal and Reciprocating Pumps. International Journal of Research Publications and Reviews, 4(3), 1806–1812. https://doi.org/10.55248/gengpi.2023.4149
[7]. Dermawan, AS (nd). Centrifugal Pump. Sebelas Maret University.
[8]. Doan. (2025). Hydrodynamic Analysis and Simulation of KS-SE3 Centrifugal Pump. Bengkalis State Polytechnic.
[9]. Fahmi, I., Zulfadli, T., Abd, M., Yusuf, M., & Kamarullah. (2024). Performance Analysis of Three-Phase Electric Motor as a Centrifugal Pump Driver at PDAM Tirta Mountala Aceh Besar. Scientific Journal of Mechanical Engineering, 1(2), 45–51.
[10]. Giawa, S. (2024). Analysis of Distribution Pump Performance in Drinking Water Treatment. Faculty of Engineering, University of Medan Area.
[11]. Iqram, HM (2025). Vibration Signal Analysis (Vibration Test) on Centrifugal Pumps for Predictive Maintenance at PDAM Tirta Terubuk Bengkalis. Bengkalis State Polytechnic.
[12]. Khairil, M. (2025). Analysis of the Effect of NPSH (Net Positive Suction Head) on Cavitation in Centrifugal Pumps at PT Meridan Sejati Surya Plantation. Bengkalis State Polytechnic.
[13]. Mahendra, Y. (2025). Capstand Motor Electrical Maintenance at PT Inti Indosawit Subur (Asian Agri Group I). Bengkalis State Polytechnic.
[14]. Milal, NA, & Puspitasari, E. (2025). Centrifugal Pump Maintenance Planning at PT. X Using the Reliability Centered Maintenance (RCM) and Reliability Centered Spares (RCS) Methods. Scientific Journal of Mechanical, Electrical, and Computer Engineering, 5(2), 457–471. https://doi.org/10.51903/juritek.v5i2.5033
[15]. Permana, BZ (2023). Maintenance of the G-930A Centrifugal Pump Using the Corrective Maintenance Method at PT Polychem Indonesia Tbk, Merak Chemical Division. Sultan Ageng Tirtayasa University.
[16]. Rasyid, AM (2022). Analysis of the Effect of Centrifugal Pump Suction Height on Pump Capacity and Efficiency. Medan Area University.
[17]. Rasyid, AM, Ritonga, AAD, & Aldori, RY (2023). Analysis of the Effect of Centrifugal Pump Suction Height on Pump Capacity and Efficiency. Journal of Mechanical Engineering, Manufactures, Materials, and Energy, 7(2), 146–157. https://doi.org/10.31289/jmemme.v7i2.6189
[18]. Salmon, M., Pattykayahattu, BE, & Pattiasina, HN (2024). Performance Evaluation of Centrifugal Pump No. 3 at RPKS II at PPSDM Migas Cepu. Journal of Mechanical Engineering (JME), 2(1), 88–94.
[19]. Siregar, AM, & Damanik, SW (2020). The Effect of Impeller Exit Angle Variation on Centrifugal Pump Performance. Materials, Manufacturing and Energy Engineering, 3(2), 166–174.
[20]. Sitanggang, PL, Sinaga, NY, Siahaan, WE, & Sitanggang, H. (2024). Design and Analysis of Centrifugal Pump Characteristics Test with Series Circuit in the Faculty of Engineering's Mechanical Performance Laboratory. Uda Mechanical Technology Journal, 5(2), 133–143.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Eldion Sinambela, Abdul Gafur, Burhan Hafid
This work is licensed under a Creative Commons Attribution 4.0 International License.
