Analysis of the Causes of Exhaust Valve Guide Failure in the Doosan GV 180 TI Engine at PT Bima Golden Powerindo

Authors

  • Aditia Adrian Saputra Program Studi Sarjana Terapan Teknik Mesin Produksi dan Perawatan, Politeknik Negri Bengkalis, Riau 28714, Imdonesia.
  • Ibnu Hajar Program Studi Sarjana Terapan Teknik Mesin Produksi dan Perawatan, Politeknik Negri Bengkalis, Riau 28714, Imdonesia.
  • Murdani Program Studi Sarjana Terapan Teknik Mesin Produksi dan Perawatan, Politeknik Negri Bengkalis, Riau 28714, Imdonesia.

DOI:

https://doi.org/10.51601/ijse.v6i2.766

Abstract

Damage to the exhaust valve guide in the Doosan GV180 TI gas engine can reduce engine performance and reliability, potentially disrupting the continuity of power generation at PT Bima Golden Powerindo, Melibur Site. This study aims to identify the types of exhaust valve guide failures, analyze their contributing factors, and determine corrective action priorities using the Failure Mode and Effects Analysis (FMEA) method and Pareto Diagram. The research employed a case study approach, with data collected through field observations, visual inspections, dimensional measurements of the valve guide, and preventive maintenance records at 750 running hours. The results indicate that the dominant failure modes include excessive wear, ovality, valve sticking, overheating, and lubrication failure. FMEA analysis revealed that excessive wear has the highest risk level, making it the primary priority for corrective action. The main factors contributing to the failures are high operating temperatures, inadequate lubrication, and prolonged engine operating hours. Therefore, periodic inspections, proper lubrication system control, and replacement of the valve guide according to the manufacturer's specifications are recommended to improve engine reliability and extend its service life.

Downloads

Download data is not yet available.

References

[1] Budynas, R. G., & Nisbett, J. K. (2020). Shigley's Mechanical Engineering Design (11th ed.). New York: McGraw-Hill Education.

[2] Doosan Infracore. (2019). Doosan GV180TI Gas Engine Operation & Maintenance Manual. Seoul, South Korea: Doosan Infracore Co., Ltd.

[3] Ganesan, V. (2015). Internal Combustion Engines (4th ed.). New Delhi: McGraw-Hill Education.

[4] Heywood, J. B. (2018). Internal Combustion Engine Fundamentals (2nd ed.). New York: McGraw-Hill Education.

[5] Kementerian Energi dan Sumber Daya Mineral Republik Indonesia. (2020). Handbook of Energy & Economic Statistics of Indonesia 2020. Jakarta: Kementerian ESDM.

[6] Mobley, R. K. (2020). Maintenance Engineering Handbook (8th ed.). New York: McGraw-Hill Education.

[7] Muharram, A., & Razali. (2020). Analisis Risiko Kerusakan pada Mesin Doosan GV180TI dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) untuk Meningkatkan Kinerja Preventive Maintenance 750 Running Hours pada PLTMG PT. Bima Golden Powerindo Site Melibur. (Skripsi). Politeknik Negeri Bengkalis.

[8] Nasution, M. N. (2004). Manajemen Mutu Terpadu (Total Quality Management). Jakarta: Ghalia Indonesia.

[9] Pulkrabek, W. W. (2014). Engineering Fundamentals of the Internal Combustion Engine (2nd ed.). Upper Saddle River, NJ: Pearson Education

[9] Stamatis, D. H. (2003). Failure Mode and Effect Analysis: FMEA from Theory to Execution (2nd ed.). Milwaukee, WI: ASQ Quality Press.

[10] Stone, R. (2012). Introduction to Internal Combustion Engines (4th ed.). London: Palgrave Macmillan.

Downloads

Published

2026-07-30

How to Cite

Adrian Saputra, A., Ibnu Hajar, & Murdani. (2026). Analysis of the Causes of Exhaust Valve Guide Failure in the Doosan GV 180 TI Engine at PT Bima Golden Powerindo. International Journal of Science and Environment (IJSE), 6(2), 2443–2449. https://doi.org/10.51601/ijse.v6i2.766

Issue

Vol. 6 No. 2 (2026): May 2026

Section

Articles

License

Copyright (c) 2026 Aditia Adrian Saputra, Ibnu Hajar, Murdani

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.