The Relationship between the Implementation of Standard Operating Procedures (SOP) and the Risk of Accidents in Anchor Handling Work on the Anchor Handling, Tug, Supply (AHTS) Vessel Owned by PT. Logindo Samudramakmur TBK.
DOI:
https://doi.org/10.51601/ijse.v6i2.566Abstract
This study examines the relationship between the implementation of Standard Operating Procedures (SOPs) and the risk of accidents in anchor handling work on Anchor Handling, Tug, and Supply (AHTS) vessels owned by PT. Logindo Samudramakmur Tbk. The objectives of the study were to determine the level of accident risk and analyze the effect of SOP compliance on the risk. The research method used was quantitative with a survey design, complemented by descriptive analysis and simple linear regression. The population consisted of all deck crews involved in anchor handling work on three AHTS vessels (Logindo Enterprise, Logindo Energy, Logindo Stamina), with a total sample of 27 respondents through census techniques. Primary data were collected using a closed questionnaire that was tested for validity and reliability, then analyzed using SPSS version 26. The results showed that the risk of accidents was quite high (average 45.52 out of 50), while the implementation of SOPs was considered good (average 43.81). Pearson correlation yielded a very strong and significant negative relationship (r = 0.946, p < 0.05), with 89.4% of the risk variation explained by the regression model Ŷ = 11.824 + 0.769X. The study concluded that consistent SOP compliance significantly reduces the risk of accidents and strengthening SOPs as a safety culture is crucial for AHTS operational safety.
Downloads
References
[1]. Afriandi, S. (2025). Standar kesehatan dan keselamatan kerja yang tinggi dalam dunia pelayaran pendukung pengeboran minyak dan gas bumi (tipe kapal AHTS). Jurnal Kesehatan & Multi Disiplin, 3(1), 48–61.
[2]. Ahadi, G. D., Nur, N., & Ersela, L. (2023). The simulation study of normality test using Kolmogorov-Smirnov. Journal of Statistics and Data Science, 6(1).
[3]. Al Afdhani, A. A. (2024). Analisis pelaksanaan kerja dalam pelayanan anchor handling di deck AHTS Etzomer 505 (Doctoral dissertation, Politeknik Ilmu Pelayaran Makassar).
[4]. Alam, M. F. (2023). Upaya pencegahan kecelakaan kerja di deck pada saat kegiatan anchor handling di AHT Sl Flicker (Doctoral dissertation, Politeknik Ilmu Pelayaran Makassar).
[5]. Amalia, R., Herwanto, D., & Zahra, W. R. (2023). Analisis potensi bahaya dan risiko kecelakaan kerja dengan menggunakan metode hazard identification risk assessment and risk control (HIRARC) pada pemotongan kayu. Jurnal Teknik Industri, 13–19.
[6]. Andari, T., Widyastuti, R., Mukhlis, I. R., Tondong, H. I., Kusumastuti, S. Y., Kurniawan, S., Judijanto, L., Pratama, A., Boari, Y., & Purnamasari, N. (2024). Metodologi penelitian. Penerbit Akademia.
[7]. Auliya, N. H., Andriani, H., Fardani, R. A., Ustiawaty, J., Utami, E. F., Sukmana, D. J., & Istiqomah, R. R. (2020). Metode penelitian: Kualitatif dan kuantitatif. CV Pustaka Ilmu Group.
[8]. Bambang, B., Fauzi, N., Priatna, T., Ilham, A., Syah, F., Ramadhan, F. C., & Mubarok, M. H. (2026). Kajian teori sebagai fondasi perumusan hipotesis penelitian. Journal of Philosophy, 2(1), 14–20.
[9]. Bueger, C., & Liebetrau, T. (2023). Critical maritime infrastructure protection: What’s the trouble? Marine Policy, 155, 105772. https://doi.org/10.1016/j.marpol.2023.105772
[10]. Cruz, G. S. Dela, & Ocampo, A. P. (2025). Applied ISO 31000 risk management in practice: Adoption challenges and benefits in Qatar’s leading construction firm. International Journal of Multidisciplinary Applied Business and Education Research, 6(8), 4190–4208. https://doi.org/10.11594/ijmaber.06.08.33
[11]. Djajasasana, E. E., Indarti, W., & Purnomo, J. (2023). Meningkatkan efektivitas penerapan langkah keselamatan sebagai tindakan preventif di kapal AHTS Peteka 5402. Ocean Engineering: Jurnal Ilmu Teknik dan Teknologi Maritim, 2(4), 164–173. https://doi.org/10.58192/ocean.v2i4.1615
[12]. Farida, D., Pratama, G., & Susanto, B. (2022). Pengaruh corporate social responsibility dan likuiditas terhadap kinerja keuangan perusahaan yang memperoleh sustainability reporting award. Jurnal Analisis Bisnis Ekonomi, 885–905.
[13]. Ghufron, I., & Andayani, S. A. (2022). Standar operasional prosedur (SOP). CV Mitra Cendekia.
[14]. IMCA. (2024). Annual safety statistics report. International Marine Contractors Association. https://www.imca-int.com/resources/safety/
[15]. IMO. (2020). International convention for the safety of life at sea (SOLAS). International Maritime Organization.
[16]. Indartini, M., & Mutmainah. (2024). Analisis data kuantitatif: Uji instrumen, uji asumsi klasik, uji korelasi dan regresi linier berganda. Deepublish.
[17]. Ismoko, I., Asmoro, E. I., & Hidayat, Z. I. (2023). Pengaruh pemahaman K3 dan ketaatan SOP terhadap tingkat kecelakaan kerja. Marine Science and Technology Journal, 4(1), 36–42.
[18]. Mylonopoulos, F., Polinder, H., & Member, S. (2023). A comprehensive review of modeling and optimization methods for ship energy systems. IEEE Access, 32697–32707.
[19]. Nurfauji, B. B., Raihan, M., Damar, P., Wahyuni, S., Halim, H. A., Priatna, T., & Sunan, U. I. N. (2026). Perencanaan penelitian pendidikan yang sistematis. Jurnal Pendidikan Agama Islam, 3(1), 12–30.
[20]. Nurmala, E., Baihaqi, B., Hartati, D. V., Darmayanti, N. L., & Saputra, I. (2025). Loading and unloading planning to prevent work accidents on the AHTS Amber. ALTAIR: Jurnal Transportasi dan Bahari, 2(1), 19–26. https://doi.org/10.62554/t92e3069
[21]. OLF/NSA. (2020). Safe anchor handling and towing. Norwegian Shipowners’ Association.
[22]. Pasaribu, B. S., Herawati, A., Utomo, K. W., & Aji, R. H. S. (2022). Metodologi penelitian untuk ekonomi dan bisnis. Media Edu Pustaka.
[23]. Rahmawati, F., & Suryana, N. N. (2024). Pentingnya standar operasional prosedur (SOP) dalam meningkatkan efisiensi dan konsistensi operasional pada perusahaan manufaktur. Jurnal Manajemen Bisnis Digital Terkini, 1(3), 2–15.
[24]. Saputra, A., Hariyanto, S., Alwi, M. R., & Rivai, H. (2023). Identifikasi risiko bahaya keselamatan dan kesehatan kerja area sistem docking di galangan kapal dengan metode JSA melalui pendekatan HIRADC. Jurnal Penelitian Enjiniring, 27(2), 76–86. https://doi.org/10.25042/jpe.112023.02
[25]. Sarjana, S., Nardo, R., & Hartono, R. (2022). Manajemen risiko. Penerbit Widina.
[26]. Soesana, S., et al. (2023). Metodologi penelitian kuantitatif. CV Literasi Nusantara.
[27]. Subandi, S., Rahmawati, E., & Hasanah, I. (2024). Pemahaman konseptual tentang standard operating procedure (SOP): Dasar, tujuan, manfaat, dan implementasi. Jurnal Media Akademik, 2(6).
[28]. Sugiyono. (2019). Metode penelitian kuantitatif, kualitatif, dan R&D (2nd ed.). Alfabeta.
[29]. Syarifudin, M. D., Rushanti, S., & Tripariyanto, A. Y. (2025). Analisis risiko keselamatan kesehatan kerja (K3) karyawan dengan pendekatan manajemen risiko. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 3.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Vensha Pratama Annurransyah, Iie Suwondo, Firdaus Sitepu, Intan Sianturi
This work is licensed under a Creative Commons Attribution 4.0 International License.
