Arduino Uno-Based Vibration Monitoring System Design Using The Sensor Mpu5060
DOI:
https://doi.org/10.51601/ijse.v6i2.754Abstract
The development of manufacturing technology demands a machining process that produces high-quality and precise products. In the turning process, machine vibration is one of the factors that affect the quality of machining results, component life, and process stability. Excessive vibration can lead to a decrease in the surface quality of the workpiece as well as accelerate the wear of machine components. Therefore, a monitoring system is needed to effectively monitor the condition of engine vibration. This research aims to design and build an Arduino Uno-based lathe vibration monitoring system using MPU6050 sensors. The sensor is used to detect vibrations, while the Arduino Uno functions to process the measurement data. Tests are carried out with variations in spindle rotation speed and cutting depth to obtain vibration characteristics during the turning process. The results of the study are expected to be able to provide information on the condition of the lathe's vibration so that it can support monitoring machine conditions, preventive maintenance, and improving the quality of the turning process.
Downloads
References
[1] Rochim, T. (2007). Teori dan Teknologi Proses Pemesinan.
[2] Sugiyono. (2022). Metode Penelitian Kuantitatif, Kualitatif, dan R&D.
[3] Kadir, A. (2018). Arduino & Sensor.
[4] InvenSense. (2013). MPU-6000 and MPU-6050 Product Specification.
[5] International Organization for Standardization (ISO). (2009). ISO 10816-3: Mechanical Vibration—Evaluation of Machine Vibration by Measurements on Non-Rotating Parts.
[6] Kalpakjian, S., & Schmid, S. R. (2014). Manufacturing Engineering and Technology.
[7] Montgomery, D. C. (2017). Design and Analysis of Experiments.
[8] Zaira, J. Y., et al. (2025). Analisa Getaran Mesin Bubut terhadap Variasi Kecepatan Putaran Spindle.
[9] Malik, et al. (2024). Analisis Pengaruh Kedalaman Potong terhadap Getaran pada Proses Pembubutan Baja Karbon Menggunakan Pahat HSS.
[10] Bagasworo, & Machfuroh. (2024). Analisis Pengaruh Variasi Parameter Pemotongan terhadap Getaran Mesin Bubut Berdasarkan Standar ISO 10816.
[11] IBM Corp. (2019). IBM SPSS Statistics Version 26 User Guide.
[12] Holman, J. P. (2012). Experimental Methods for Engineers.
[13] Arduino. (2023). Arduino Uno Rev3 Documentation.
[14] Melexis. (2023). MLX90614 Infrared Thermometer Sensor Datasheet.
[15] Jupri, Y., et al. (2025). Pengaruh Variasi Kecepatan Spindle terhadap Getaran Mesin Bubut.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Alwin Juhendra, Razali
This work is licensed under a Creative Commons Attribution 4.0 International License.
